ROFUN 360SS 1/5 All-Metal RC Off-Road Car with 36cc Single-Cylinder Air-Cooled Two-Stroke Engine Model Remote Control Toy
ROFUN 360SS 1/5 All-Metal RC Off-Road Car with 36cc Single-Cylinder Air-Cooled Two-Stroke Engine Model Remote Control Toy
29 auf Lager
Verfügbarkeit für Abholungen konnte nicht geladen werden
ROFUN 360SS 1/5 All-Metal RC Off-Road Car with 36cc Single-Cylinder Air-Cooled Two-Stroke Engine Model Remote Control Toy
Product Specifications:
1. Model: 360SS
2. Scale: 1/5
3. Dimensions: LxWxH: 817x480x255mm
4. Net Weight: 18Kg
5. Wheelbase: Front 395mm/Rear 400mm
6. Wheelbase: 570mm
7. Rear-wheel drive
8. Rear axle brake
9. 36cc single-cylinder air-cooled two-stroke four-point fixed gasoline engine
(Standard configuration: Walbro 1107 carburetor, NGK spark plugs, CNC finish)；
10. 25KG digital all-metal gear throttle servo (CNC metal servo arm)；
11. 75KG digital metal gear steering servo (CNC metal) 12. All-terrain tires (CNC metal rims, CNC metal tire mounting nuts)；
12. 8mm metal shock absorbers (CNC metal shock absorber core)；
13. SC6V 4500mAh battery；
14. 8000rpm wear-resistant clutch；
15. Telescopic CVD half-shaft；
16. Metal roll cage；
17. CNC metal symmetrical steering；
18. All CNC metal parts；
19. New mixing tank；
20. Emergency repair kit included with vehicle；
Note: Does not contain any liquids, gasoline, etc.
Usage Precautions:
1. Charge the car promptly upon receiving it. Insufficient power may cause signal instability and loss of control.
2. During the break-in period for a new gasoline-powered car, it's best to levitate it, ensuring all four tires are not touching the ground.
This prevents excessive engine load, allowing for better engine performance later.
It also ensures safety in case of improper operation.
3. There are no specific octane requirements for gasoline; 92#, 95#, 98#, or other international octane ratings are all acceptable. Two-stroke engine oil (2T) must be used. Please refer to the engine oil manual for specific mixing ratios (different grades may have different ratios).
4. This is a large remote-controlled car; please do not use it indoors. For outdoor use, please check the surrounding environment to ensure no other people or animals are present, preventing personal injury or property damage.
5. Power-on/off sequence: Power on: first turn on the remote control, then the car's power switch. Power off: first turn off the car's power switch, then the remote control.
The car must be able to receive the signal. If the signal is lost or not received...
The car could go out of control, which would also create the risk of the servo motor burning out.
